IntegraMOD

Gentle people,

Greetings.This is my first post here and so please be patient with me. I am not very proficient with software.We have a forum under design.We have "Integramod" like on top of this webpage for a logo.Could you please let me know how to change it and replace it with a logo of our choice.I got a Jpeg on my desktop and also on photobucket and I want to use that. I did go through another post where a suggestion was made about rewriting a template. I am afraid I did not fully comprehend the rewriting aspect of it.I do not want to damage the site .Could you please explain in a bit more detail about how to remove the "Integramod" logo and replace it with the logo in Jpeg form on my desktop?That will be a great help and many thanks in advance.

Best-
Locksley.

upload your image to root/images/logo
make a note of the physical size of your image eg.. 200x600
go to acp/general admin/Configuration/ "Logo Setting"
set your size then select your logo from the dropdown box. You may have to select another first and save it to get your newly added logo to appear in the box.

Hi, Many thanks for your reply.If you don't mind, where is roo/images/logo located? Your help is greatly appreciated.Thanks for your patience.

Best-
Locksley.

typo root/images

Thank you.Where exactly root/images located?Please bear with me.Thanks.

the file you downloaded from this site is called Integramod141. That is the root folder of the forum. If you rename this folder, the inside of it will still be root. If you upload the contents of the folder to your website root, without the folder, then your website root becomes your forum root

i am baffled with this also, i am new to integremod and would like to change my full size banner, i am in administration and have found the images/logo section and the size, but how do we upload our banners to the server? do we do it through admin or somewhere else?
thankyou for your patience
wendy xxx

Helterskelter,

Thanks for trying to help us and your time.Being technologically challenged, I must request you to be a bit elaborate in your instructions.As Wendy writes, how would I access the roote/images and where are they located?I have been exploring the admin panel and still not able to locate this.Please also let us know how to change it.Once again, I appreciate your help and thanks for the same.

Best-
Locklsey.

On line it looks like the folder you start at or root.

so if your portal loads at http://www.my-site.com/phpbb2 that's the root folder.
to add a image you must up load it first via FTP to the *.*/phpbb2/images, Then you can us it in admin.

I really feel like a retard despite your best efforts to help. Right, when I type my domain name the website opens.Then I log-in as admin and can access admin panel.Which tab do I click on to access the folder you mention?Please bear with me.

Best-
Locksley.

what is your sites url?

http://www.gundogtraining.org.uk


Thanks for trying to help.

Best-
Locksley

Then I log-in as admin and can access admin panel.Which tab do I click on to access the folder you mention?

Not in admin, you need to FTP the picture from your desk top to the folder, or you can use the hosts cp to upload it.

Hi CaNNon, where do I locate this folder and how can use the host's cp to upload it? Please give me step-by-step directions if you could.That will be a great help.Many thanks.

Best-
Locksley

locksleyr
you need to download a free program such as coffee cup ftp hun, from there hit servers and add your site details, once youve done that select connect
once your in find the logo or banner ud like to upload on the left hand side, then go to the right hand side and select public html, then images and logo.
simply drag and drop your new logo into that file and hit upload.
when youve done that go back to the top of this post and follow helterskelters advice ...
go to acp/general admin/Configuration/ "Logo Setting"
set your size then select your logo from the dropdown box. You may have to select another first and save it to get your newly added logo to appear in the box.
hugs wen xxx

helterskelter,
if you read above ul see that i have managed to get my new full banner into the logo drop down box and it shows in their no bother, but ive added the dimensions and submitted but still it hasnt appeared on my site. what am i doing wrong hun ?
thanks for your help xxx

i have my header/logo uploaded and showing in my logo drop down box, i have added the size but it still wont show up on my site, any ideas where im going wrong please guys xxx

Wendy, You are a star.Will try this right away.Many thanks.

Best-
Locksley

good luck locksleyr, if you get ur logo to show on ur site, let me know how hun,im still stuck with it in my logo drop down box but not on site xxx

which template are you using? what is your url?

Trying with coffeecup FTP and it is keep on saying my login details are incorrect.Don't know where I am making a mistake.

Best-
Locksley

the login details are differnt from your forum info. You will find the information in your FTP Manager in your web hosting control panel

i take it youve added your sites domain name, then your i p numbers as your host name?
after that you need the the user name and password that you signed up to domain with , and not your sites user name and password and then select connect.
you should have recieved an email with these details on when you first started your site under the heading of something like...

"your account for (your site name) is now ready for use"

Your account has been created with the following details:

Username:

Password:

Domain:

http://= i p numbers

i hope this helps you hun xxx

hi helterskelter,
im using subice black, my url is
http://www.paranormalinsights.com/portal.php
thanks for looking
xxx

looks like you go it fixed. If you dont see the new logo, then do a ctrl+f5 refresh, because your logo is not the default IM logo

i tried your ctrl and f5 helterskelter but it still hasnt changed the the header logo i have selected in the drop down box.
the one you see on my site was put on by a friend, but i hadnt a clue how im afraid and id like to be able to change them at will, im so close and yet so far lol, how frustrating .
thanks for your help.

can you post your code from your templates/Dark/overall_header.tpl ?

tell me exactly where to find what your looking for and il do that for you helter xxx

Use your ftp go to root folder then the /templates folder then to /Dark, in that folder download the file "overall_header.tpl"

erm i found it and hit download but i havent a clue where its gone hun lol, i used coffee cup, any ideas?

ok i found this in my styles mod...

<td><center><a><img></a></center></td>

i believe this is what we are after? i tried changeing the (image1.jpg) for the title of my new header but it didnt work, is there something else i need to do hun ? xxx

i have tried replacing
}"><img src="images/logo/Image1.jpg"

with

}"><img src="images/logo/SPOOKYMONK2b.jpg"

but when i submit it just goes back to the original image (image1.jpg)

in order to have logo control from the acp, replace that code with this

Code: Select all

             <td><a><img></a></td>  

ok ive replaced that code, so do i put the image name in logo and the logo width and logo height where stated in the code?
and do i have to enter the sites name in the two spaces next to that and then submit ?

i replaced the code and filled in the details but as soon as i submit it , it just goes bk to the original code. its not saving the new code or my details, any ideas why?

Hey Woo, I have been out of town and just got back. Ill be on messenger today and we can get your logos strait.

I'll look you up in a hour or two after I get done doing stuff around the house and we can get you back on track.


Ray

ok ray, thanks hun, il keep locksleyr posted once i know what im doing myself.

thanks for your time and patience helter skelter, il let you know how i get on hun xxx

Wendy, Once again, you are a star.I am trying still.And thank you all for your help.

Best-
Locksley

do not replace any of the text in the code I posted.
img src="{LOGO}" is the php path to the logo you select from the acp


this code is replaced with the size you set in the acp automaticaly.
width="{LOGO_WIDTH}" height="{LOGO_HEIGHT}"

so your overall header should have this exact code, with no replacements

Code: Select all

        <td><a><img></a></td>

I added the align center, because the code you posted used the center tag

Hi Wendy, How is the logo thing going on?Did you manage to change it?Let me know.Thank you.

Best-
Locksley.

hi locksleyr,
unfortunately im no futher forward hun, i think ray has been abducted by aliens lol as he hasnt got back to me on this, must be full of busy i guess.
i decided to take a few days break as my head was done in with it and now i cant remember where i found the code in the acp to get back to it to try again <img>
if your still willing to help id be greatful hun
thanks wendy x

ok ive found it again phew, il try what youve said above and get back to you hun x

ok i changed this to align centre, then tried to add my logo code here (="images/logo/xxxxxxx")the height and width are are show below,

<td><center><a><img></a></center></td>
</tr>

but still no change, can you see where im going wrong hun?

i have the banner/logo i want to use stored in photobucket, do i use the html code to insert my logo code? thats what ive been trying to do and do i need to put my site name and addy in also where it says ="{SITENAME}"

when i click submit the page then goes to ftp config
i have the host
the login name
but im not sure what the ftp path to phb is hun, i had put my site addy in there but when i put my password in it comes up error


sorry for rambling but i just cant get my head around this lol x

Hi Wendy, traveling in the same boat.Thing is so complicated to the not so well versed.LOL.This is one thing that has been holding me from doing anything on the forum. All the best to you once again.

Best-
Locksley

ok locksleyr and helter skelter ive finally got it cracked with rays help (speak of the devil and he shall appear )lol only kidding ray.

once you have got ur logo uploaded to your ftp its just a matter of going intoyour admin,
extreme styles,edit templates and choose your template (mine is subice) scroll down until you find over all header.

heres the simple part that i couldnt get my head around,
only change the name of the image thats in there for the title of the image you have uploaded, be exact as its case sensitive, type in the height and width in the correct place and hit submit.

it will bring you to the ftp config page that has your host name (that is your ip address numbers)
then login is the name you login to your server with, (not your site)

my ftp path to phpbb was wrong and i had to get ray to change that so unfortunately i cant tell you how to get that, but im sure someone can.

then finally the password for your server (not ur site) and you should be good to go.
refresh and your header should appear.
good luck and i hope you can understand my waffling xxx

ok i spoke to soon here, i have installed the hl2 template and again im trying to add my own overall header, ive done everything that ive been shown(i think) and this is what i have
<LOGO>
<td>
<div><a><img></a>
</div>
</td>
<LOGO>

but for love nor money it wont change, it keeps going bk to its own header
can you check my site out and see what im doing wrong please
http://www.paranormalinsights.com/portal.php

thanks wendy x

lordy i realised what was wrong, i had to remove the div code but now ive got my header plus the templates own header, heeeeelp plz x

changing the logo requires NO file edits. After you upload the logo image via FTP, or your CPanel file manager, to root/images/logo/ The ONLY change you need to make is in acp/General Admin/Configuration/ Logo Setting

i have just put it bk to its original code with my image code and sizes added, my banner is gone from above and altogether and the templates header still remains.
i also have my banner in acp under logo but no change hun

why are all uploaded templates so wide? everyone ive tried goes massive

are you scrolling to the bottom of acp/General Admin/Configuration/ and hitting the "submit" button?
If you are, then your website is caching the images and it will eventually show up, but not knowing your cache duration, I cant say how long it will take.
the HL2 theme was designed at 1280x1024. almost all the other templates will resize nicely down to 1024x768 and many look fine at 600x800. If your using 600x800, its time for a new monitor...lol if it looks two big at 1024x768, then check on the images in your portal blocks and logo sizes

acp is submited hun, but according to ray i cant use that now anyway as it was changed from the default header to fit my banner size, however i had managed to change my header in the styles mod just yesterday in the style mods overal header doing what ive done here,

<td>
<div><a><img></a>
</div>
</td>

but for some reason this template doesnt want to recognise it.
sorry to be a pain

of coarse you can use it. Ray would have had to do some drastic changes in order for it not to work. The size is set in the acp.
This does work. It has worked for over 12,000 users and before this thread, I had never heard of anyone having this problem.
I made or ported most of the templates available here so I am familiar with thier function.
this will work, but your banner is too wide for HL2 unless you have a large monitor because it also has a 360px wide flash in the header

Code: Select all

<td><a><img></a></td>

so i do need to remove the bit of code that says div style="position:align centre

and change it to

<td> <a><img></a></td>

is this right ?

sorry i just noticed your post above the code, so what size header would be compatible with this template and where would it show up? above the flash header, or in it as part of the header ?

for the time being ive gone bk to subice blk until i look futher into how i change sizes and find out what sizes i need for headers and banners ect.
i do appreciate your help and i will get bk to this x

here is the HL2 logo location. The logo on this template is placed differently than most. It uses an absolute position tag and youll have to play with the #'s to position it differently

[photo]http://www.integramod.com/images/logolocation.jpg[/photo]

is that integramod logo 500 x 110 ?
if so, if i made a logo at that size how would i add it, thru ftp and acp the same as overall header ?

yes. It uses the same basic code as the standard overall_header

ok, thanks hun xxx